CIS Cameralink 工业相机VCC-G22V31ACL

General Specification
Item Specification
Pickup device
Device Type 1/3 type Interline Transfer B/W CCD, Sony ICX424AL
Effective Pixel Number 659(H) x 494 (V)
Unit Cell Size 7.4μm (H) x 7.4μm (V)
Chip Size 5.79mm (H) x 4.89mm (V)
Video output frequency
Pixel Clock 49.0908 MHz
Horizontal Frequency 62.936kHz Pixel Clock: 780 CLK
Vertical Frequency
Full Frame Scan Mode: 525H, approx 120 Hz
Partial Scan Mode 1: 345H, approx 180 Hz
Partial Scan Mode 2: 262H, approx 240 Hz
Partial Scan Mode 3: 174H, approx 360 Hz
Sync. system Internal Sync. System
Video output standard Camera Link
Resolution 480 TV lines
Resolving power 8bit / 10bit
Sensitivity F4.0 400 lx (Shutter 1/120s, Gain 0dB)
Minimum illumination F1.4 2.5 lx (Shutter 1/120s, Gain +12dB)
Dust or stains in
optical system
No dust or stain shall be detected on the testing screen with setting the camera
aperture at F16.
Power requirements DC +12V ± 10% (Max voltage not to exceed 15V)
Power consumption 2.5 W (DC +12V IN)
Dimension Refer to overall dimension drawing (Clause 11)
29mm x 29mm x 29mm (excluding projection)
Mass Approx. 50 g
Lens mount C mount (Refer to overall dimension drawing )
Optical axis accuracy Refer to drawing for CCD Optical Axis Accuracy (Clause 10)
Gain variable range -1～+12dB
Shutter speed
variable range
OFF (1/120), 1/200, 1/240, 1/500, 1/1000, 1/2000, 1/4000, 1/8000, 1/14000,
1/24000, 1/40000, 1/100000s
Trigger shutter mode ?Fixed Trigger Shutter Mode ?Pulse Width Trigger Shutter Mode
*Trigger pulse width shall be over 1H and less than 1/2s.
VCC-G22V31ACL Rev.900-614-32-00
?2009 CIS Corporation. All rights reserved.
7
Item Specification
Safety/Quality
standards
UL: Conform to UL Standard including materials and others.
RoHS: Conform to RoHS
CE: Conform to EN55022:2006 (Class A): Emission
Conform to EN61000-6-2:2005: Immunity
FCC: To be applied to FCC Class A digital Device
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Durability
Vibration
Acceleration 98 m/s2 (10.0G)
Frequency 20～200 Hz
Direction XYZ 3 directions
Testing time 120 min for each direction
Shock No malfunction shall be occurred with 490m/s2(50G) for ±X, ±
Y, and ±Z, 6 directions. (without package)
Operation environment
Temperature Operation guaranteed: -5℃～+45℃
Performance guaranteed: 0℃～+40℃
Humidity RH 20～80% with no condensation
Storage environment
Temperature -25℃ ～ +60℃
Humidity RH 20～80% with no condensation
m.robot_vision.b2b168.com