sony偏振光工业相机XCG-CP510
XCG-CP510 is innovative camera incoporating the newly developed 5.1 MP global shutter
pixel-level polarization CMOS sensor.
The On-Chip Polarizer features a four-directional polarizer formed on the photodiode of the
image sensor which allows the detection of linear angles of polarized light. Combined with a
uniq
Specifications (Polarization Camera)
XCG-CP510
Basic Specifications
B/W / Color
B/W
Image Size
5.1 MP
Image Sensor
IMX250 (Polarization image sensor)
2/3-type CMOS Image sensors with a global shut
ter function (Pregius)
Number of Effective
Pixels (H x V)
2,464 ×2,056
Cell Size (H x V)
3.45 μm×3.45 μm
Standard Output Pixels
(H x V)
2,448 ×2,048
Frame Rate
23 fps (8 bit, Mono/Raw)
Minimum Illumination
1.5 lx (iris: F1.4, Gain: +18 dB, Shutter: 1/23 s)
Sensitivity
F4 (400 lx, Gain:0 dB , Shutter: 1/23 s)
SNR
More than 50 dB (Lens close, Gain: 0 dB, 8 bit)
Gain
Auto,Manual : 0 dB to 18 dB
Shutter Speed
Auto, Manual : 60 to 1/100,000 s
Camera Features
Readout Modes
Normal, Partial scan
Readout Features
Test pattern
Synchronization
Hardware trigger, Software trigger, PTP(IEEE1588)
Trigger Modes
OFF (Free run), ON (Edge detection, Trigger width
detection), Special trigger (Burst trigger, Bulk trig
ger, Sequential trigger, Free set sequence)
Userset
16
User Memory
64 bytes × 16 ch
Partial Scan
W (Pixel)
16 to 2,464
H (Line)
16 to 2,056
GPO
EXPOSURE/Strobe/Sensor lead out/Trigger
through/Pulse generation signal/User defined 1, 2,
3 (selectable)
Other Features
Area gain, Defect correction, Shading correction,
Temperature readout
Interface
Video Data Output
digital Mono8, 10, 12 bit
(default setting 8 bit)
Digital Interface
Gigabit Ethernet (1000BASE-T/100BASE-TX)
Camera Specification
GigE Vision® Version 2.0/1.2
Digital I/O
ISO IN (x1), TTL IN/OUT (x2, selectable)
General
Lens Mount
C mount
Flange Back
17.526 mm
Power Requirements
DC +12 V (10.5 V to 15.0 V), IEEE802.3af (37 V to 57 V)
Power Consumption
DC+12 V 3.3 W (max.)
IEEE802.3af 3.7 W (max.)
Operating Temperature
–5 °C to +45 °C (23 °F to 113 °F)
Performance Guarantee
Temperature
0 °C to 40 °C (32 °F to 104 °F)
Storage Temperature
–30 °C to +60 °C (–22 °F to +140 °F)
Operating Humidity
20% to 80% (no condensation)
Storage Humidity
20% to 80% (no condensation)
Vibration Resistance
10 G
(20 Hz to 200 Hz 20 minutes for each direction -x, y, z )
Shock Resistance
70 G
Dimensions (W x H x D)
29 × 29 × 42 mm (1 3/16 × 1 3/16 ×1 11/16 inches)
(excluding protrusions)
Mass
Approx. 65 g (2 oz)
MTBF
62,042 hours (Approx. 7.1 years)
Regulations
UL60950-1, FCC Class A, CSA C22.No.60950-1,
IC Class A Digital Device, CE : EN61326
(Class A), AS EMC: EN61326-1, VCCI Class A,
KCC,CISPR22/24+IEC61000-3-2/-3
Supplied Accessories
Lens mount cap (1), Safety Regulations (1)
ntrast enhancement, object recognition, scratch detection, reflection removal, and stress and distortion inspection.
2/3-type Polarization Image CMOS Sensor
with Global Shutter Function (Pregius)
5.1MP 23 fps
XCG-CP510 (B/W)
SDK for Polarization Camera (for Windows)
XPL-SDKW
m.robot_vision.b2b168.com